PfL FORMULA 4601

4-Cycle Motorcycle Engines Protection

Permafused Gasoline (4-Cycle) Motorcycle Engine Protection
The unique chemistry of this proprietary formulation chemicaly bonds a micro-thin Permafused Lubricant film to all lubricated metalsurfaces inside an engine. Provides full time PfL protection from friction, heat, wear, acid and corrosion, unequaled by modern day motor oils, synthetic lubricants, oil additives, moly or PTFE type engine treatments. Bishop´s Original reacts only with PfL activated metal and does not build-up, change tolerances or alter oil flow through galleys and filters.
This unique formula has proven over the past 28 years through official testing and consumer use, to provide unequaled protection and improved performance. The use of Bishop´s Original will not void manufacturers engine waranty.

Directions for use.
Change oil and filter. Add 1118 ml of Bishop´s Original 4601 4-cycle Motorcycle Engine Protection and top it off to manufacturer´s recommended capacity. Start engine and run briefly to blend. Drive normally until the next oil change. If less than 2 500 km, treat again as directed. DO NOT USE in new or rebuit engines with less than 10 000 km or until ring have seated, Bishop´s Original Engine Protection may be used regardless of the accumulated miles on the engine.
Under normal operating conditions, retreat every 100-150 000 km Engines subject to stop and go, severe or heavy duty use, we recomment retreating at least once a year for optimum protection and performance.
Additive Package in this formula is compatible with oils meeting the U.S.and EU waranty requirements: API, Caterpillar, Cumins, Allison, Mack, MIL L 46152 C&D, MIL L 2104 E&D
 

Benefits
Reduces: Friction, Heat, Wear, Oil Consumption, APM Draw, Idle Overheating and Corrosion
Improves: Compression, Horsepower, Fuel Millage, Engine Life, Cold Weather Starts, and Overall Performance.
Also Provides Protection From: Oil Shear, Oil Loss, Additive Breakdown, Acids and Dry Starts.