|
|
Specifications |
|
API Gravity 60/60 F |
28 |
|
Viscosity SUS @ 210 Deg.F |
86.98 |
|
Density |
7,2 lb/ga |
|
Solubility in Water |
Insoluble |
|
Melt Point(oC) |
-17,8 |
|
Flash Point(oC) |
315,5 |
|
Viscosity Index |
126 |
|
Usual Shipping Containers |
32 oz (946 ml) Plastic Bottles |
|
The unique
chemistry of this proprietary formulation chemicaly bonds a
micro-thin Permafused Lubricant film to all lubricated
metalsurfaces inside an engine. Provides full time PfL
protection from friction, heat, wear, acid and corrosion,
unequaled by modern day motor oils, synthetic lubricants,
oil additives, moly or PTFE type engine treatments. Bishop´s
Original reacts only with PfL activated metal and does not
build-up, change tolerances or alter oil flow through
galleys and filters.
This
unique formula has proven over the past 28 years through
official testing and consumer use, to provide unequaled
protection and improved performance. The use of Bishop´s
Original will not void manufacturers engine waranty.
Karr V
Motortechnik , Hemmingen, Germany Test Results :
Vehicle : VW
Golf (1 500 cu.cm)
Power
Improvement : +3.2 HP
University
of Utah - Test Results :
Vehicle :
Chevrolet 4 500 cu.cm.
Power
Improvement :+15.6%
Fuel Milage
: +11.7 km per litter
Directions for use.
Change oil
and filter. Add 946 ml of Bishop´s Original 4101 Marine
Engine Protection and top it off to manufacturer´s
recommended capacity. Start engine and run briefly to blend.
Drive normally until the next oil change. DO NOT USE in new
or rebuit engines with less than 25 hours or until ring
have seated, Bishop´s Original Engine Protection may be used
regardless of the accumulated miles on the engine.
Under
normal operating conditions, retreat every 300 hours.
Engines subject to severe or heavy duty use, we recommend
retreating at least once a year for optimum protection and
performance.
Additive
Package in this formula is compatible with oils meeting the
U.S.and EU waranty requirements: API, Caterpillar, Cumins,
Allison, Mack, MIL L 46152 C&D, MIL L 2104 E&D
The use
of this product will not avoid manufacturer´s engine
warranty.
Benefits :
Reduces:
Friction, Heat, Wear, Oil Consumption, APM Draw, Idle
Overheating and Corrosion
Improves : Compression, Horsepower, Fuel Millage, Engine Life, Cold
Weather Starts, and Overall Performance.
Also
Provides Protection From: Oil Shear, Oil Loss, Additive
Breakdown, Acids and Dry Starts. |
