Gravity 60/60 F
Viscosity SUS @ 210 Deg.F
Solubility in Water
(354 ml) Plastic Bottles
chemistry of this proprietary formulation chemicaly bonds a
micro-thin Permafused Lubricant film to all lubricated
metal surfaces inside an engine. Provides full time PfL
protection from friction, heat, wear, acid and corrosion,
unequaled by modern day motor oils, synthetic lubricants,
oil additives, moly or PTFE type engine treatments. Bishop´s
Original reacts only with PfL activated metal and does not
build-up, change tolerances or alter oil flow through
galleys and filters.
formula has proven over the past 28 years through official
testing and consumer use, to provide unequaled protection
and improved performance. The use of Bishop´s Original will
not void manufacturers engine waranty.
Motortechnik , Hemmingen, Germany Test Results:
Vehicle: VW Golf
(1 500 cu.cm)
Utah - Test Results:
4 500 cu.cm.
+11.7 km per litter
Directions for use :
Change oil and
filter. Add 354 ml of Bishop´s Original 400-D Diesel Engine
Protection and top it off to manufacturer´s recommended
capacity. Start engine and run briefly to blend. Drive
normally until the next oil change. If less than 2500 km,
treat again as directed. DO NOT USE in new or rebuit engines
with less than 10 000 km or until ring have seated, Bishop´s
Original Engine Protection may be used regardless of the
accumulated miles on the engine.
operating conditions, retreat every 100-150 000 kmEngines
subject to stop and go, severe or heavy duty use, we
recomment retreating at least once a year for optimum
protection and performance.
Package in this formula is compatible with oils meeting the
U.S.and EU waranty requirements: API, Caterpillar, Cumins,
Allison, Mack, MIL L 46152 C&D, MIL L 2104 E&D
Heat, Wear, Oil Consumption, APM Draw, Idle Overheating and
Compression, Horsepower, Fuel Millage, Engine Life, Cold
Weather Starts, and Overall Performance.
Protection From: Oil Shear, Oil Loss, Additive Breakdown,
Acids and Dry Starts.